|
|
ÎÞ±êÌâÎĵµ
|
|
General Description |
316 Stainless Steel Air Service equipment provides industries with a complete range of air service equipment 1/4-1" NPT (BSP).
Designed and manufactured in Wolverhampton, UK. The range has been developed to provide complete solutions to pressure control, filtration and inline lubrication applications.
Units
- Filters Regulators
- Filter/Regulators
|
Operating Fluids |
Air and other Gases |
Technical Data |
Working Temperature
-50°C to +90°C (-58°F to +194°F) |
Elements
40 micron (optional 5 micron) |
Max Inlet Pressure
Filter - 20 bar
Regulators - 20 bar
Filter/ Regulators - 20 bar
High Pressure - 40 bar |
Ports
1/4", 1/2", 3/4" and 1" NPT and BSP |
|
Drain Types
Manual |
|
|
|
|
General Description |
Non Return Valves
316 Stainless Steel non return valves for pressures up to 12 bar (174 psi)
316 Stainless Steel non return valves for pressures up to to 25 bar (362 psi) |
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available (details on application)
Liquids
Low pressure hydraulic, mineral oil or water. |
Technical Data |
Exhaust Port Flow Regulator
1/4" 646 (23.0) - 0.65 (10.0)
3/8" 1100 (39.0) - 1.10 (17.0)
1/2" 1800 (64.0) - 1.80 (28.0) |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential
|
Working temperature
-50°C to +90°C (-58°F to +194°F) |
Needle Valve (3mm orifice)
1/4" 290 (10.5) - 0.30 (4.6) |
Working pressure (gases & liquids)
12 bar (174 psi)
24 bar (362 psi) |
Non Return Valves (12 bar)
1/4" 1600 (57) - 1.6 (25.0)
3/8" 2200 (80) - 2.3 (35.0)
1/2" 3800 (137) - 3.9 (60.0)
3/4" 5800 (205) - 5.8 (90.0)
1" 7700 (274) - 7.8 (120.0) |
Minimum opening pressure
0.2 bar (2.90 psi) |
Non Return Valves (25 bar)
1/4" 736 (26) - 0.74 (11.4)
3/8" 1840 (45) - 1.85 (28.5)
1/2" 2600 (91) - 2.60 (40.0) |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175
Brass CZ 121M |
Internal parts
Stainless steel AISI 316L to NACE MR-0175 |
Springs
316 Stainless steel |
Seals
EPDM |
|
|
|
|
General Description |
A 316 stainless steel combination unit for filtration and pressure regulation of compressed air offshore industries.
- 316 Stainless steel throughout. Large flow paths minimise pressure drop. Rolling diaphragm design.
- Precision adjustment
Filter Unit
Large 40 micron standard element with manual drain for the removal of liquids and solids.(5 micron element 3/4 - 1") |
Operating Fluids |
Gases, air, inert gas, sweet (natural) and sour gases.
Ingress protection
Heavy seas / on deck rating
Non-Relieving / Self-Relieving |
Technical Data |
Working Temperature
Ambient temperature
-50°C to +90°C (-58°F to +194°F) |
Ports
1/4", 1/2", 3/4" and 1" NPT and BSP |
Flow capacity
10bar (145 psi) inlet pressure, 6 bar (87psi) secondary pressure with 1bar (14.5 psi) pressure drop
1/4" - 62 dm¨°/sec (130 SCFM)
1/2" - 100 dm¨°/sec (212 SCFM) |
Cv (Kv)
1/4" - 2.4 (34.0) 3/8" - 3.3 (47.0)
1/2" - 4.4 (63.0) 3/4" - 5.0 (71.0)
3/4" - 10.0 (145) High Flow version
1" - 15.0 (217) High Flow version |
Max Inlet Pressure
Manual drain - 20 bar (290 psi)
Regulated pressure
0.50 to 2 bar (7.2 to 29 psi)
0.50 to 4 bar (7.2 to 58 psi)
0.50 to 8 bar (7.2 to 116 psi)
0.50 to 12 bar (7.2 to 174 psi) |
Drain Types
Manual
Gauge ports
1/8" NPT
(1/4" NPT and BSP options available)
Relief /vent port
1/8"NPT (Fitted with bug screen) |
|
Construction Materials |
Bod /Bonne /Bowl and Internals
Stainless Steel AISI 316L to NACE MR-01-75 |
Element
40 micron 316 Stainless steel (5 micron option) |
Valve spring
Inconel X750 |
Diaphragm and valve assembly
Fluorosilicone and 316 Stainless steel |
Adjustment spring
316 Stainless steel |
Seals
Fluorosilicone |
|
|
|
|
General Description |
316 stainless steel filter for filtration of compressed air in the offshore, food, pharmaceutical and allied industries. Large 40 micron standard element with manual or automatic drain for the removal of liquids and solids.
- Large flow paths minimise pressure drop. 316 Stainless steel throughout.
- Large stainless steel element.
|
Operating Fluids |
Gases, air, inert gas, sweet (natural) and sour gases.
Ingress protection
Heavy seas / on deck rating |
Technical Data |
Working Temperature
Ambient temperature
-50°C to +90°C (-58°F to +194°F) |
Ports
1/4", 1/2", 3/4" and 1" NPT and BSP |
Flow capacity
7 bar (102 psi) supply pressure, 0.35 bar (5 psi) pressure drop
1/4" - 23 dm¨°/sec ( 49 SCFM)
1/2" - 49 dm¨°/sec (104 SCFM) |
Cv (Kv)
1/4" - 2.4 (34.0) 3/8" - 3.3 (47.0)
1/2" - 4.4 (63.0) 3/4" - 5.0 (71.0)
3/4" - 10.0 (145) High Flow version
1" - 15.0 (217) High Flow version |
Max Inlet Pressure
Filter - 20 bar
Regulators - 20 bar
Filter/ Regulators - 20 bar
High Pressure - 40 bar
Working Pressure
Manual drain - 20 bar (290 psi) |
Drain Types
Manual
Gauge ports
1/8" NPT
(1/4" NPT and BSP options available) |
|
Construction Materials |
Bod /Bonne /Bowl and Internals
Stainless Steel AISI 316L to NACE MR-01-75 |
Element
316 Stainless Steel |
Seals
Fluoroelastomer |
|
|
|
|
|
General Description |
Uni-directional
316 Stainless Steel in-line flow regulators for uni-directional operation (free flow return).
Bi-directional
316 Stainless Steel in-line flow regulators for bi-directional operation (separate flow control in each direction). |
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases. |
Technical Data |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential
Uni-directional
1/4" 1000 (35) - 1.0 (15.5)
3/8" 1680 (59) - 1.7 (26.0)
1/2" 2520 (89) - 2.5 (39.0)
3/4" 5428 (192) - 5.4 (84.0)
1" 9820 (347) - 9.8 (152)
Bi-directional
1/4" 620 (22) - 0.6 ( 9.6)
3/8" 1290 (45) - 1.3 (20.0)
1/2" 2000 (71) - 2.0 (31.0) |
Maximum flow
at 6 bar (87 psi), 1 bar (14.5 psi) differential
3/2 valves - 480 L/min (17 SCFM)
5/2 valves - 680 L/min (24 SCFM) |
Working pressure (gases)
12 bar (174 psi) |
Working temperature
-50°C to +90°C (-58°F to +194°F) |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175 |
Seals
EPDM |
Spring
316 Stainless steel |
Internal parts
Stainless steel AISI 316L to NACE MR-0175 |
|
|
|
|
General Description |
Needle Valve
316 Stainless Steel needle valve with 3mm or 6mm orifice.
Exhaust Port Flow Regulators
316 Stainless Steel exhaust flow regulator/ breather supplied
complete with tamper proof cap. |
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases. |
Technical Data |
Exhaust Port Flow Regulator
1/4" 646 (23.0) - 0.65 (10.0)
3/8" 1100 (39.0) - 1.10 (17.0)
1/2" 1800 (64.0) - 1.80 (28.0) |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential
Needle Valve (3mm orifice)
1/4" 290 (10.5) - 0.30 (4.6) |
Working pressure (gases)
12 bar (174 psi) |
Working temperature
-50°C to +90°C (-58°F to +194°F) |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175
|
Seals
EPDM |
Springs
316 Stainless steel |
Internal parts
Stainless steel AISI 316L to NACE MR-0175 |
|
|
|
|
General Description |
A range of compact 3/2 pilot solenoid and pilot operated poppet valves in 316 stainless steel for use on gases.
- High flow. Hazardous area solenoids. Coil with 316 housing.
- Atex Certification.
|
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases. Sour gas option available (details on application) |
Technical Data |
Solenoid
EExd |
Cv (Kv)
1/4" - 1.75 (25)
3/8" - 2.2 (31)
1/2" - 4.00 (57)
3/4" - 10.2 (146)
1" - 15.0 (214)
1 " - 20.0 (286)
1" - 28.0 (400) |
Working Temperature
Valve only
-50°C to +90°C (-58°F to +194°F) |
Ports
1/4" - 11/2"NPT (BSP optionavailable) |
Pressure Ratings
(gases & liquids)
X3 to 12 bar (45 to174 psi) |
Flow
Maximum flow at 6 bar (87 psi), 1 bar (14.5 psi) dif differential
1/4" - 2668 L/min ( 94 SCFM)
3/8" - 3521 L/min ( 124 SCFM)
1/2" - 6402 L/min ( 226 SCFM)
3/4" - 16005 L/min ( 565 SCFM)
1" - 24008 L/min ( 848 SCFM)
1 " - 32010 L/min (1130 SCFM)
1" - 44814 L/min (1583 SCFM) |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-01-75 |
Seals
EPDM |
Spring
316 Stainless steel
Poppet
Stainless steel AISI 316L to NACE MR-01-75
|
Solenoid
ATEX |
|
|
|
|
General Description |
316 stainless steel pressure regulator for pressure regulation of compressed gases for the offshore industries.
- 316 Stainless steel throughout. Large flow characteristics. Rolling diaphragm design. High relief flow. Precision adjustment. Integral mounting holes.
- Full range of accessories.
|
Operating Fluids |
Gases, air, inert gas, sweet (natural) and sour gases.
Ingress protection
Heavy seas / on deck rating |
Technical Data |
Working Temperature
Ambient temperature
-50°C to +90°C (-58°F to +194°F) |
Ports
1/4", 1/2", 3/4" and 1" NPT
(BSP option available) |
Flow capacity
10bar (145 psi) inlet pressure, 6 bar (87psi) secondary pressure with 1bar (14.5 psi) pressure drop
1/4" - 63 dm¨°/sec (133 SCFM)
1/2" - 103 dm¨°/sec (218 SCFM)
3/4" - 130 dm¨°/sec (274 SCFM) |
Cv (Kv)
1/4" - 2.4 (34.0) 3/8" - 3.3 (47.0)
1/2" - 4.4 (63.0) 3/4" - 5.0 (71.0)
3/4" - 10.0 (145) High Flow version
1" - 15.0 (217) High Flow version |
Max Inlet Pressure
20 bar (290 psi)
Regulated pressure
0.50 to 2 bar (7.2 to 29 psi)
0.50 to 4 bar (7.2 to 58 psi)
0.50 to 8 bar (7.2 to 116 psi)
0.50 to 12 bar (7.2 to 174 psi) |
Gauge ports
1/8" NPT
(1/4" NPT and BSP options available)
Relief /vent port
1/8"NPT (Fitted with bug screen) |
|
Construction Materials |
Body /Bonnet /Bowl and Internals
Stainless Steel AISI 316L to NACE MR-01-75 |
Element
316 Stainless Steel |
Bonnet Bowl
316 Stainless Steel |
Seals
Fluoroelastomer |
Valve spring
Inconel X750 |
Diaphragm and valve assembly
Fluoroelastomer and 316 Stainless steel |
Adjustment spring
316 Stainless steel |
|
|
|
|
|
General Description |
Quick Exhaust Valves
316 Stainless Steel quick exhaust valves in 5 sizes. |
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases. |
Technical Data |
Exhaust Port Flow Regulator
1/4" 646 (23.0) - 0.65 (10.0)
3/8" 1100 (39.0) - 1.10 (17.0)
1/2" 1800 (64.0) - 1.80 (28.0) |
Supply to outlet
1/4" 1290 (46) - 1.3 (20.0)
3/8" 1810 (64) - 1.8 (28.0)
1/2" 3810 (135) - 3.8 (59.0)
3/4" 4520 (160) - 4.5 (70.0)
1" 7700 (274) - 7.8 (120.0) |
Working temperature
-50°C to +90°C (-58°F to +194°F) |
Outlet to exhaust
1/4" 2780 (98) - 2.8 (43.0)
3/8" 3810 (135) - 3.8 (59.0)
1/2" 6460 (228) - 6.5 (100.0)
1" 11000 (388) - 11.0 (170.0) |
Working pressure (gases & liquids)
12 bar (174 psi) |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175 |
Seals
EPDM |
Springs
316 Stainless steel |
Internal parts
Stainless steel AISI 316L to NACE MR-0 |
|
|
|
|
General Description |
A range of compact 3/2 and 5/2 solenoid, pilot, mechanical or manually operated spool valves in 316 stainless steel for use on gases.
- Hazardous area solenoids. Coil with 316 housing. Closed centre. Atex Certification.
- CENELEC approvals.
|
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases. |
Technical Data |
Solenoid
EExd |
Cv (Kv)
3/2 valves 1.0 (15)
5/2 valves 1.2 (17) |
Working Temperature
Valve only
-50°C to +90°C (-58°F to +194°F) |
Ports
1/4"NPT (BSP option available) |
Pressure Ratings
Single solenoid valves
3 to 12 bar (45 to174 psi)
Double solenoid valves
2 to 12 bar (30 to174 psi) |
Flow
Maximum flow at 6 bar (87 psi),
X1 bar (14.5 psi) differential
X3/2 valves - 1000 L/min (35.3 SCFM)
X5/2 valves - 1200 L/min (42.4 SCFM) |
|
Construction Materials |
Body/ Spool
Stainless steel AISI 316L to NACE MR-01-75 |
Seals
EPDM |
Spring
316 Stainless steel |
Solenoid
ATEX |
|
|
|