|
|
|
|
General Description |
Air Reservoirs
316 Stainless Steel wall mounted high quality air receivers with full penetration butt welds on all main seams.
Floor mounted units - details on application
Back-up Reservoirs
316 Stainless Steel back-up reservoirs of tie-rod construction.
|
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available (details on application)
Liquids
Low pressure hydraulic, mineral oil or water. |
Technical Data |
Working Temperature
Air Reservoirs
-50°C to +50°C (-58°F to +122°F)
Back-up Air Reservoirs
-20°C to +70°C (-4°F to +158°F) |
Working pressure (gases & liquids)
Air Reservoirs
16 bar (232 psi)
ASME VIII above 30 litres
please check |
Back-up Air Reservoirs
10 bar (145 psi) |
|
Construction Materials |
Body /Bonne /Bowl and Internals
Stainless Steel AISI 316L to NACE MR-01-75 |
Design Codes
Air Reservoirs - Type SSR
Manufactured in accordance with:-
PD 5500. Cat 3
or ASME VII Div 1
(not U - Stamped)
3rd Party Approval is mandatory |
|
|
|
|
General Description |
N.R.V. Breathers
316 Stainless Steel non return breather to prevent ingress
into exhaust and vent ports.
Breathers (Silencers)
316 Stainless Steel sintered element silencers
used to protect ports open to the atmosphere.
'Bug Screen' Port Vent
316 Stainless Steel sintered element used to protect vent ports to atmosphere.
|
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available (details on application)
Liquids
Low pressure hydraulic, mineral oil or water. |
Technical Data |
Working temperature
-20°C to +70°C (-4°F to +158°F) |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential
|
N.R.V. Breathers
1/4" 646 (23) - 0.65 (10)
3/8" 1300 (45) - 1.30 (20)
1/2" 1550 (54) - 1.60 (24) |
Cv (Kv)
1/4" - 2.4 (34.0) 3/8" - 3.3 (47.0)
1/2" - 4.4 (63.0) 3/4" - 5.0 (71.0)
3/4" - 10.0 (145) High Flow version
1" - 15.0 (217) High Flow version |
Breathers (Silencers)
1/4" 1550 (55) - 1.5 (24)
3/8" 1940 (68) - 2.0 (30)
1/2" 3410 (123) - 3.5 (54)
3/4" 5500 (194) - 5.5 (85)
1" 5700 (201) - 5.7 (88) |
Working pressure (gases & liquids)
12 bar (174 psi) |
|
|
|
|
General Description |
Non Return Valves
316 Stainless Steel non return valves for pressures up to 12 bar (174 psi)
316 Stainless Steel non return valves for pressures up to to 25 bar (362 psi) |
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available (details on application)
Liquids
Low pressure hydraulic, mineral oil or water. |
Technical Data |
Exhaust Port Flow Regulator
1/4" 646 (23.0) - 0.65 (10.0)
3/8" 1100 (39.0) - 1.10 (17.0)
1/2" 1800 (64.0) - 1.80 (28.0) |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential
|
Working temperature
-20°C to +70°C (-4°F to +158°F) |
Needle Valve (3mm orifice)
1/4" 290 (10.5) - 0.30 (4.6) |
Working pressure (gases & liquids)
12 bar (174 psi)
24 bar (362 psi) |
Non Return Valves (12 bar)
1/4" 1600 (57) - 1.6 (25.0)
3/8" 2200 (80) - 2.3 (35.0)
1/2" 3800 (137) - 3.9 (60.0)
3/4" 5800 (205) - 5.8 (90.0)
1" 7700 (274) - 7.8 (120.0) |
Minimum opening pressure
0.2 bar (2.90 psi) |
Non Return Valves (25 bar)
1/4" 736 (26) - 0.74 (11.4)
3/8" 1840 (45) - 1.85 (28.5)
1/2" 2600 (91) - 2.60 (40.0) |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175
Brass CZ 121M |
Internal parts
Stainless steel AISI 316L to NACE MR-0175 |
Springs
316 Stainless steel |
Seals
Nitrile |
|
|
|
|
General Description |
Non Return Valves
316 Stainless Steel non return valves for pressures up to 12 bar (174 psi)
316 Stainless Steel non return valves for pressures up to to 25 bar (362 psi) |
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available (details on application)
Liquids
Low pressure hydraulic, mineral oil or water. |
Technical Data |
Exhaust Port Flow Regulator
1/4" 646 (23.0) - 0.65 (10.0)
3/8" 1100 (39.0) - 1.10 (17.0)
1/2" 1800 (64.0) - 1.80 (28.0) |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential
|
Working temperature
-50°C to +90°C (-58°F to +194°F) |
Needle Valve (3mm orifice)
1/4" 290 (10.5) - 0.30 (4.6) |
Working pressure (gases & liquids)
12 bar (174 psi)
24 bar (362 psi) |
Non Return Valves (12 bar)
1/4" 1600 (57) - 1.6 (25.0)
3/8" 2200 (80) - 2.3 (35.0)
1/2" 3800 (137) - 3.9 (60.0)
3/4" 5800 (205) - 5.8 (90.0)
1" 7700 (274) - 7.8 (120.0) |
Minimum opening pressure
0.2 bar (2.90 psi) |
Non Return Valves (25 bar)
1/4" 736 (26) - 0.74 (11.4)
3/8" 1840 (45) - 1.85 (28.5)
1/2" 2600 (91) - 2.60 (40.0) |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175
Brass CZ 121M |
Internal parts
Stainless steel AISI 316L to NACE MR-0175 |
Springs
316 Stainless steel |
Seals
EPDM |
|
|
|
|
General Description |
Uni-directional
316 Stainless Steel or Brass in-line flow regulators for uni-directional operation (free flow return).
Bi-directional
316 Stainless Steel or Brass in-line flow regulators for bi-directional operation (separate flow control in each direction). |
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available (details on application)
Liquids
Low pressure hydraulic, mineral oil or water. |
Technical Data |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential
Uni-directional
1/4" 1000 (35) - 1.0 (15.5)
3/8" 1680 (59) - 1.7 (26.0)
1/2" 2520 (89) - 2.5 (39.0)
3/4" 5428 (192) - 5.4 (84.0)
1" 9820 (347) - 9.8 (152)
Bi-directional
1/4" 620 (22) - 0.6 ( 9.6)
3/8" 1290 (45) - 1.3 (20.0)
1/2" 2000 (71) - 2.0 (31.0) |
Maximum flow
at 6 bar (87 psi), 1 bar (14.5 psi) differential
3/2 valves - 480 L/min (17 SCFM)
5/2 valves - 680 L/min (24 SCFM) |
Working pressure (gases & liquids)
12 bar (174 psi) |
Working temperature
-20°C to +80°C (-4°F to +176°F) |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175
Brass CZ 121M |
Seals
Nitrile |
Springs
316 Stainless steel |
Internal parts
Stainless steel AISI 316L to NACE MR-0175 |
|
|
|
|
General Description |
Uni-directional
316 Stainless Steel in-line flow regulators for uni-directional operation (free flow return).
Bi-directional
316 Stainless Steel in-line flow regulators for bi-directional operation (separate flow control in each direction). |
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases. |
Technical Data |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential
Uni-directional
1/4" 1000 (35) - 1.0 (15.5)
3/8" 1680 (59) - 1.7 (26.0)
1/2" 2520 (89) - 2.5 (39.0)
3/4" 5428 (192) - 5.4 (84.0)
1" 9820 (347) - 9.8 (152)
Bi-directional
1/4" 620 (22) - 0.6 ( 9.6)
3/8" 1290 (45) - 1.3 (20.0)
1/2" 2000 (71) - 2.0 (31.0) |
Maximum flow
at 6 bar (87 psi), 1 bar (14.5 psi) differential
3/2 valves - 480 L/min (17 SCFM)
5/2 valves - 680 L/min (24 SCFM) |
Working pressure (gases)
12 bar (174 psi) |
Working temperature
-50°C to +90°C (-58°F to +194°F) |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175 |
Seals
EPDM |
Spring
316 Stainless steel |
Internal parts
Stainless steel AISI 316L to NACE MR-0175 |
|
|
|
|
General Description |
Needle Valve
316 Stainless Steel needle valve with 3mm or 6mm orifice.
Exhaust Port Flow Regulators
316 Stainless Steel exhaust flow regulator/ breather supplied
complete with tamper proof cap. |
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available (details on application)
Liquids
Low pressure hydraulic, mineral oil or water. |
Technical Data |
Exhaust Port Flow Regulator
1/4" 646 (23.0) - 0.65 (10.0)
3/8" 1100 (39.0) - 1.10 (17.0)
1/2" 1800 (64.0) - 1.80 (28.0) |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential
Needle Valve (3mm orifice)
1/4" 290 (10.5) - 0.30 (4.6) |
Working pressure (gases & liquids)
12 bar (174 psi) |
Working temperature
-20°C to +80°C (-4°F to +158°F) |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175
Brass CZ 121M |
Seals
Nitrile |
Springs
316 Stainless steel |
Internal parts
Stainless steel AISI 316L to NACE MR-0175 |
|
|
|
|
General Description |
Needle Valve
316 Stainless Steel needle valve with 3mm or 6mm orifice.
Exhaust Port Flow Regulators
316 Stainless Steel exhaust flow regulator/ breather supplied
complete with tamper proof cap. |
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases. |
Technical Data |
Exhaust Port Flow Regulator
1/4" 646 (23.0) - 0.65 (10.0)
3/8" 1100 (39.0) - 1.10 (17.0)
1/2" 1800 (64.0) - 1.80 (28.0) |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential
Needle Valve (3mm orifice)
1/4" 290 (10.5) - 0.30 (4.6) |
Working pressure (gases)
12 bar (174 psi) |
Working temperature
-50°C to +90°C (-58°F to +194°F) |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175
|
Seals
EPDM |
Springs
316 Stainless steel |
Internal parts
Stainless steel AISI 316L to NACE |
|
|
|
|
General Description |
Pressure Switches (Air)
A compact fully adjustable pneumatically operated 316 Stainless Steel or Brass pressure switch with operating pressures up to 16 bar (232 psi). For use on fail safe systems.
- Compact / Lightweight.
- 5 pressure ratings.
- Integrated tagging facility.
- Fluoroelastomer seals.
- 3/2 and 5/2 versions.
|
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available (details on application)
Liquids
Low pressure hydraulic, mineral oil or water. |
Technical Data |
Ports
1/4" NPT (BSP option available)
1/8" NPT Pilot port |
Maximum pilot pressure inlet
16 bar (232 psi) |
Cv (Kv)
3/2 valves 0.5 (7.5)
5/2 valves 0.7 (10.5)
Pressure setting hysteresis
0.25 bar (3.63 psi) |
Regulated pressure (adjustable)
For main directional valve
1.0 to 2.0 bar (14.5 to 29 psi)
1.0 to 4.0 bar (14.5 to 58 psi)
1.0 to 7.0 bar (14.5 to 102 psi)
1.0 to 10 bar (14.5 to 145 psi)
1.0 to 16 bar (14.5 to 232 psi) |
Working pressure (gases & liquids)
For main directional valve
12 bar (174 psi) |
Maximum flow
at 6 bar (87 psi), 1 bar (14.5 psi) differential
3/2 valves - 480 L/min (17 SCFM)
5/2 valves - 680 L/min (24 SCFM) |
Working temperature
-20°C to +80°C (-4°F to +176°F) |
(Note 16bar regulated pressure must be fed from independent supply to main directional valve) |
|
Construction Materials |
Body & Spool
Stainless steel AISI 316L to NACE MR-0175 |
Seals & Diaphragm
Fluoroelastomer |
Springs
316 Stainless steel |
|
|
|
|
|
General Description |
Quick Exhaust Valves
316 Stainless Steel quick exhaust valves in 5 sizes |
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available (details on application)
Liquids
Low pressure hydraulic, mineral oil or water. |
Technical Data |
Exhaust Port Flow Regulator
1/4" 646 (23.0) - 0.65 (10.0)
3/8" 1100 (39.0) - 1.10 (17.0)
1/2" 1800 (64.0) - 1.80 (28.0) |
Supply to outlet
1/4" 1290 (46) - 1.3 (20.0)
3/8" 1810 (64) - 1.8 (28.0)
1/2" 3810 (135) - 3.8 (59.0)
3/4" 4520 (160) - 4.5 (70.0)
1" 7700 (274) - 7.8 (120.0) |
Working temperature
-20°C to +70°C (-4°F to +158°F) |
Outlet to exhaust
1/4" 2780 (98) - 2.8 (43.0)
3/8" 3810 (135) - 3.8 (59.0)
1/2" 6460 (228) - 6.5 (100.0)
1" 11000 (388) - 11.0 (170.0) |
Working pressure (gases & liquids)
12 bar (174 psi) |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175 |
Seals
Nitrile |
Springs
316 Stainless steel |
Internal parts
Stainless steel AISI 316L to NACE MR-0175 |
|
|
|
|
General Description |
Quick Exhaust Valves
316 Stainless Steel quick exhaust valves in 5 sizes. |
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases. |
Technical Data |
Exhaust Port Flow Regulator
1/4" 646 (23.0) - 0.65 (10.0)
3/8" 1100 (39.0) - 1.10 (17.0)
1/2" 1800 (64.0) - 1.80 (28.0) |
Supply to outlet
1/4" 1290 (46) - 1.3 (20.0)
3/8" 1810 (64) - 1.8 (28.0)
1/2" 3810 (135) - 3.8 (59.0)
3/4" 4520 (160) - 4.5 (70.0)
1" 7700 (274) - 7.8 (120.0) |
Working temperature
-50°C to +90°C (-58°F to +194°F) |
Outlet to exhaust
1/4" 2780 (98) - 2.8 (43.0)
3/8" 3810 (135) - 3.8 (59.0)
1/2" 6460 (228) - 6.5 (100.0)
1" 11000 (388) - 11.0 (170.0) |
Working pressure (gases & liquids)
12 bar (174 psi) |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175 |
Seals
EPDM |
Springs
316 Stainless steel |
Internal parts
Stainless steel AISI 316L to NACE MR-0175 |
|
|
|
|
General Description |
Shuttle Valves
316 Stainless Steel shuttle valves for three way "OR" function.
|
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available (details on application)
Liquids
Low pressure hydraulic, mineral oil or water. |
Technical Data |
Shuttle Valve
1/4" 1350 (45) - 1.36 (21.0)
3/8" 1830 (65) - 1.80 (28.4)
1/2" 3550 (126) - 3.6 (55.0)
3/4" 5500 (194) - 5.5 (85.0)
1" 9000 (319) - 9.0 (140.0) |
Quick Exhaust Valve c/w Flow Regulator
Supply to outlet
1/4" 1290 (46) - 1.3 (20.0)
3/8" 1810 (64) - 1.8 (28.0)
1/2" 3810 (135) - 3.8 (59.0) |
Working temperature
-20°C to +70°C (-4°F to +158°F) |
Outlet to exhaust
1/4" 2780 (98) - 2.8 (43.0)
3/8" 3810 (135) - 3.8 (59.0)
1/2" 6460 (228) - 6.5 (100.0) |
Working pressure (gases & liquids)
12 bar (174 psi) |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175
Brass CZ 121M
|
Seals
Nitrile |
Springs
316 Stainless steel |
Internal parts
Stainless steel AISI 316L to NACE MR-0175 |
|
|
|
|
General Description |
Shuttle Valves
316 Stainless Steel shuttle valves for three way "OR" function.
|
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases. |
Technical Data |
Shuttle Valve
1/4" 1350 (45) - 1.36 (21.0)
3/8" 1830 (65) - 1.80 (28.4)
1/2" 3550 (126) - 3.6 (55.0)
3/4" 5500 (194) - 5.5 (85.0)
1" 9000 (319) - 9.0 (140.0) |
Quick Exhaust Valve c/w Flow Regulator
Supply to outlet
1/4" 1290 (46) - 1.3 (20.0)
3/8" 1810 (64) - 1.8 (28.0)
1/2" 3810 (135) - 3.8 (59.0) |
Working temperature
-50°C to +90°C (-58°F to 194°F) |
Outlet to exhaust
1/4" 2780 (98) - 2.8 (43.0)
3/8" 3810 (135) - 3.8 (59.0)
1/2" 6460 (228) - 6.5 (100.0) |
Working pressure (gases & liquids)
12 bar (174 psi) |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175 |
Seals
EPDM |
Springs
316 Stainless steel |
Internal parts
Stainless steel AISI 316L to NACE MR-0175 |
|
|
|
|
General Description |
Thermal Fuses
316 Stainless Steel thermal fuses for fire release. Available for temperature settings. |
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available (details on application)
Liquids
Low pressure hydraulic, mineral oil or water. |
Technical Data |
Working temperature
-20°C to +70°C (-4°F to +158°F)
-20°C to +96°C (-4°F to +205°F)
-20°C to +102°C (-4°F to +216°F)
-20°C to +124°C (-4°F to +255°F)
-20°C to +137°C (-4°F to +279°F)
-20°C to +200°C (-4°F to +392°F) |
Shuttle Valve
10 bar (145 psi) |
Maximum flow L/min (SCFM) - Cv(Kv)
at 6 bar (87 psi), 1 bar (14.5 psi) differential |
|
Working pressure (gases & liquids)
12 bar (174 psi) |
|
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175
|
Seals
Nitrile |
Springs
316 Stainless steel |
Internal parts
Stainless steel AISI 316L to NACE MR-0175 |
|
|
|
|
General Description |
Visual Indicators
Compact 316 Stainless Steel panel mounted visual indicator with various colour options. |
Operating Fluids |
Gases
Filtered lubricated or non-lubricated air, inert gas, sweet (natural) gases.
Sour gas option available (details on application)
Liquids
Low pressure hydraulic, mineral oil or water. |
Technical Data |
Working temperature
2°C to +70°C (36°F to +149F) |
Working pressure (gases & liquids)
1 to 12 bar (14.5 to 174 psi) |
|
Construction Materials |
Body
Stainless steel AISI 316L to NACE MR-0175 |
Seals
Nitrile |
Springs
316 Stainless steel |
Internal parts
Stainless steel AISI 316L to NACE MR-0175 |
Visual Indicator Piston
Acetal |
Visual Indicator asembly
Acetal with acrylic lens |
|
|
|