Welcome to PST (China) Development Co.

ADVANTAGES:
Reduced effort and increased efficiency.
Annealed copper pipe: - ø 10 to 22 mm, - ø 3/8" to 7/8", PEX/AL/PEX pipes: ø10 to 32 mm.
Patented mechanism: - reduces the bending effort required (-25 % for a 22 mm diameter pipe) and provides virtually the same bending capacity as a hydraulic crossbow bender for a lower cost, - improves the mechanism's robustness, - increases the bending accuracy by reducing trigger travel.
Optimisation of materials for reduced weight and increased strength: - lightweight alloy body and trigger, - high-strength steel rack and mechanism, - glass-fibre reinforced polyamide handle.
Aluminium bending formers: - can bend annealed pipes before they have completely cooled, - optimum bend quality for drawing.

RECOVERY AND RECYCLING UNIT

This unit is used to recover and recycle all types of CFC, HCFC and HFC cooling fluids. Tracer liquid may be inserted when filling. Self draining system. This principle is used to drain any oil and gas contained in the unit. This unit is fitted with 2 manometers which enable the systems, operating in R410A to be loaded, among other functions.
Delivered with: - 1 1500 mm hose (Réf. 400203). - 1 1500 mm hose (Réf. 400204). - 1 1500 mm hose (Réf. 400205). - 1 pair of goggles. - 1 pair of gloves. - 1 90° 1/4' 'SAE M x 5/16' ' SAE connector. - 1 power supply cable.
Recovery capacity : - Vapour: 24 kg/h. - Liquid: 40 kg/h. - Push pull : 220 kg/h.

ELECTRIC HIGH PRESSURE PIPE CLEANER

1.1/2'' (40 mm) to 6'' (150 mm).
This machine can be used to clean and uinblock all types of pipes most diameters of pipe obstructed by grease or friable materials such as grease, silt, soap, sand, clay, etc. as well as ice plugs.
ADVANTAGES:
EASY TO USE: All that is required is to guide the lightweight, flexible hose into the pipe by hand. It will then force its way through all obstructions. As it is extracted, the back-jets of the nozzle clean and rinse the walls of the pipe, allowing the pipe to flow freely once more.
POWERFUL AND ENDURING: 140 bar - 11 l/min. Radial pump with brass head and 3 high density ceramic pistons providing a four-fold increase in service life. It's slow operating speed (1440 rpm) allows it to run continuously for several hours at a time (4 hours) without the risk of overheating.
COMPLETE: high pressure pipe cleaner is supplied with 9 accessories.
POWER SUPPLY: The cleaner is powered at 220V , allowing it to be used on site or in the home. It's low power requirement (3000 W) allows it to be operated from a 15A line and aven a 10 kW generator set.
STURDY: reinforced hose.
VERY MANOEUVRABLE: Its two large diameter wheels allow it to draw from a tank.
VERY SAFE: This cleaner is fitted with a timed stop system. If left without working for 15 seconds, it shuts down and automatically restarts the moment the guin or the pedal is operated again.
PRATICAL: The two 10 m long hoses allow the cleaner to be used in places that are inaccessible to the machine (stairs, confined spaces, etc.).
FAST: When used as a cleaner, the 140 bar water pressure and flow rate of 660 l/h ensure a fast, efficient cleaning action. Using a rotary nozzle will significantly increase the impact force.
Supplied with: - 1 pipe cleaning hose,1/4" diameter, 40 m long (without nozzle), - 1 stainless steel 3-jet nozzle (without front jet), - 1 stainless steel 4-jet nozzle (with front jet), - 1 standard stainless steel traction-effect rotary nozzle with brass bush, - 2 high pressure hoses, 10 m long, - 1 operating pedal, - 1 gun with double spray lance and free hand high/low pressure control.

VISIOVAL DETECTOR

FOR ACCURATELY LOCATING A PROBLEM OBSERVED BY THE CAMERA
Used with the inspection camera fitted with a sensor (Visioval Evolution - 294005), the detector indicates the position and the depth (clear readings up to up to 3 metres) of the camera's transmitter (in non-metallic pipes). This simplifies the task of locating a blockage or other problem detected by the camera.

Digital processing of the received signal ensures reliable, accurate and rapid detection. - Depth measurement, - Detection sensitivity adjustment for increased accuracy, - Detected frequency: 640 Hz, - Automatic screen illumination, - Removable loudspeaker to assist listening in noisy environments, - Highly manoeuvrable, weighs only 2.3 kg, - 40 hour autonomy (standard batteries or equivalent NiMH rechargeable batteries) with battery charge status indicator.

MULTI-MATERIAL INTERNAL/EXTERNAL REAMER

ADVANTAGES:
2 models in accordance with the diameters of the tubes to be reamed.
Reaming of all types of tubes (Copper, stainless steel, aluminium, steel, hard plastics, multi-layer).
Internal and external reaming of the tube.
Precise reaming (due to its large number of small steel blades).
Ergonomic (easy handling, aluminium finish).
For copper, stainless steel, aluminium, steel, hard plastics and multi-layer tubes: ø 8 to 35 mm/ 5/16" to 1.3/8" for 221251, ø 12 to 54 mm/ 1/2" to 2" for 221252.

DRY CORE BITS FOR BRICKS AND HOLLOW RUBBLE STONES FOR V 130 CORE DRILL

Core bit with 7 mm segments.
These core bits have light to let the dust be evacuated.

WET DIAMOND HOLE SAW

CENTRING KIT

Guides the core bit at the start of drilling.
Caution: Remember to remove the kit once the core bit has penetrated into the surface to be drilled.

PETROL HIGH PRESSURE PIPE CLEANER

2'' (50 mm) to 6'' (150 mm). This machine can be used to clean and unblock all types of pipes most diameters of pipe obstructed by grease or friable materials such as grease, silt, soap, sand, clay, etc. as well as ice plugs.
ADVANTAGES:
EASY TO USE: All that is required is to guide the lightweight, flexible hose into the pipe by hand. It will then force its way through all obstructions. As it is extracted, the back-jets of the nozzle clean and rinse the walls of the pipe, allowing the pipe to flow freely once more.
POWERFUL AND ENDURING: 190 bar - 18 l/min. Radial pump with brass head and 3 high density ceramic pistons providing a four-fold increase in service life. It's slow operating speed (1440 rpm) allows it to run continuously for several hours at a time (4 hours) without the risk of overheating.
COMPLETE: high pressure pipe cleaner is supplied with 8 accessories.
POWER SUPPLY: Red 11 Honda PRO engine.
STURDY: reinforced hose.
VERY MANOEUVRABLE: Its lightweight, rigid and 4 pneumatic whells allow it to draw water from the tank.
PRATICAL: The characteristics of the pump allowit to draw water from the tank (max height: 1 m - max length: 7m). The two 10 m long hoses allow the cleaner to be used in places that are inaccessible to the machine (stairs, confined spaces, etc.).
FAST: When used as a cleaner, the 190 bar water pressure and flow rate of 1080 l/h ensure a fast, efficient cleaning action. Using a rotary nozzle will significantly increase the impact force.
Supplied with: - 1 pipe cleaning hose,1/4" diameter, 40 m long (without nozzle), - 1 stainless steel 3-jet nozzle (without front jet), - 1 stainless steel 4-jet nozzle (with front jet), - 2 high pressure hoses, 10 m long, - 1 operating pedal, - 1 gun with double spray lance and free hand high/low pressure control.

DRY CORE DRILLING BIT FOR SOLID BRICKS AND BLOCKS FOR V 130 CORE DRILL

ADVANTAGES: For water- and dust-free core drilling.
Core bit with 7 mm segments.
For use only with suction kit ref. 050056. Notches for attachment of centring kits ref. 050058 and 050059.

PENCIL REAMER WITH INTERCHANGEABLE BLADE

ADVANTAGES:
Possibility of changing the blade when it is worn.
Receptacle to store the spare blades.
Choice of blade according to the tube type.
For internal reaming of copper, PVC and PEHD tubes.
3 blades supplied as standard.
Pack of 5 additional copper, PVC and PEHD blades available (ref . 221265).
Possibility of reaming stainless steel tubes (pack of 5 stainless steel blades 221266).

VIPER M20+BATTERY-POWERED MECHANICAL PRESS FITTING MACHINE

ADVANTAGES:
Microcontroller controlled press fitting.
Automatic return at end of crimping.
Battery charge monitored by microcontroller: the crimping cycle can only begin if there is enough power. (when changing the battery, perform one empty cycle to confirm the available power).
Ultra fast (4 seconds to perform a complete cycle on a 32 mm PEX/AL/PEX pipe).
Compatible with all Virax inserts.
PER, PEX, PB and PEX/AL/PEX pipes from 12 to 32 mm.
Copper pipes from 12 to 28 mm
- Quick locking pin. - End of crimping indicator. - Maintenance after 17.000 crimping cycles (pre-warning after 15.000 cycles). - 180° rotating head. - Compact: 370 mm long. - Rating: 230 W.
Supplied in a case (without inserts) together with 2 No. 14.4 V (2.4 Ah) batteries - 1 No. 1 hour charger.
Pliers: 1,240 kg
Battery: 0,895 kg

WET DIAMOND DRILL BIT

Essential for drilling all types of tiles.
Specially designed for drilling very hard materials: - White earthenware, - Single-fired stoneware, - Enamelled stoneware, - Red stoneware or clinker, - Marble, stone and granite, - Vitrified clay or porcelinato.
DRILL BITS: - Highly resistant, - Internally irrigated for better cooling.
STAINLESS STEEL WATER HEAD: - Adjustable valve flow control, - "Gardena " quick-coupling water supply attachment.
DRILLING GUIDE: - Quick, secure suction attachment.
Supplied in a plastic case containing: - 4 drill bits, - 2 drill bodies, - 1 x 12 mm open-end wrench, - 1 water head, - 1 centring guide, - 1 core-removal tool for extracting cores from inside the drill bits. (ref. 221714 only).
Weight: 1.300 Kg ; · Dimensions: 266 x 170 x 165, Speed of rotation: 2000 to 6000 rpm,
Drill bits:·ø6, 8, 10, 12 mm, · 70 mm long,·Thread: M10, · Tightened with 12 mm wrench.
Centring guide: ABS / stainless, ·Suction attachment: ø115 mm.
Water head: ·Material: stainless steel: ·Quick water supply connection: "Gardena®" type, ·Thread: 1/2'',·Chuck: ·13 mm.

Suction kit

Compatible only for use with the V 130 core drilling machine. Extracts dust during dry drilling. The suction head is provided with a handle to provide a better hold on the machine. To be used with dry core drills for suction kits
Kit comprises: - 1 suction head, - 1 adaptor (1/2" M x 1/2" F).

EXTRA-WIDE OPENING ADJUSTABLE WRENCH

ADVANTAGES:
HANDY (1 wrench instead of several, gain of weight and space).
ERGONOMIC (sheathed handle).
ECONOMIC purchase (the extra-wide wrench is cheaper than the total price of several wrenches).
Sheathed extra-wide opening 8'' adjustable wrench, ideal for working on copper, brass in plumbing, air conditioning, refrigeration, maintenance, heating.
Thanks to a wide opening jaw and torsion resistance it substitutes for 3 wrenches (82, 102, 122). Its ergonomic no-slip handle offers a firm grip. Its thin noses and flush move open jaw allow using it in confined spaces.