The anti-rotation spring systems, series TSO, are standard spring systems.They allow a horizontal manipulation of parts on different levels. The anti-rotation function so ensures a part gripping in always the same position.

The extensions in series L allow gripping on various levels from the same installation plate. These extensions can be adjusted at different heights.

The spring system in series TS 1.17 can be fitted on all suction cups in group 1 (VP, VSA, VS with diameters of between 5 and 25 mm) for IM21 and on suction cups in series VPG 5 to 20.

Ball joints in series IMU and IMUKGL are recommended for the gripping of dished products or rotating products.

Specially designed for vacuum functions, the COVAL non-return valve corresponds to a feed-through section equivalent to a hole with a diameter of 9.6 mm.

The safety valve in series CSP is a useful safety device in the event of loss of vacuum or emergency stop as it maintains the vacuum in the suction cup.

The vacuum feeders in series NVS and NVR allow distribution of the vacuum in 4 to 8 channels by a simple unit.

Foam strips are suitable for the gripping of products with an irregular or striated surface.

The mechanical feelers in series PMG2 are fitted on flat suction cups in series VP with diameters of between 30 ans 60 mm of all materials (suction cups in group 2).
The mechanicals feeler is actuated by contact with the object and opens, so freeing the route of the vacuum.