 |
1.2402 - 2408 : Hydraulic ram oil.
Highly refined mineral oil, essential for the proper operation of Virax hydraulic benders (ref. 2402/2408). Very high lubrication, prevents oxidation,... |
|
 |
2.2402 - 2408 : Tripod.
Range of tripods for fitting to Virax benders to avoid stooping, as well as for forming bends at the ends of pipes or working in confined spaces. |
|
 |
3.2402 - 2408 : Cheeks 3/8 to 1.1/2open cheeks.
For ram no.1. |
|
 |
4.2402 - 2408 : 3/8 to 1.1/4" sliding cheeks.
For ram no.1. |
|
|
5.2402 - 2408 : cheeks 3/8 to 2" open cheeks.
For ram no.2. |
|
|
6.2402 - 2408 : 3/8 to 2" sliding cheeks.
For ram no.2. |
|
 |
1.2502 : Accessories. |
|
 |
2.2502 : Loose guide. |
|
 |
3.2502 : Sliding guide + pin. |
|
 |
4.2502 : Formers. |
|
 |
5.2502 : Attachable manual bender with loose slide.
Wall thickness: 0.8 to 1.5 mm. Bending angle: 0 to 180 Red Universal formers 8 to 22 mm. Bending radius: 4.3 D. 8 to 16 mm (concentric formers).... |
|
 |
6.2502 : Attachable manual bender with sliding guide.
Wall thickness: 0.8 to 1.5 mm. Bending angle: 0 to 180 Red Universal formers 8 to 22 mm. Bending radius: 4.3 D 8 to 16 mm (concentric formers). ... |
|
 |
1.2511 : Bending pliers steel.
Bending capacity on hardened and annealed copper pipes: 6 to 18 mm and 1/4 to 5/8 O.D. / wall thickness 1 to 1.2 mm. Bending radius: 2 to 3.5 D.... |
|
 |
2.2514 : Bending pliers aluminium.
For hardened and annealed copper pipes: 8 to 16 mm / wall thickness: 1 to 1.2 mm. Bending radius: approx. 3.85 D. Lightweight alloy body. Rounded sh... |
|
 |
3.2515 :Actibend - bending pliers composite.
For bending annealed, hard and half-annealed copper pipes, aluminium and stainless steel pipes ( 316 L, 304 L ): ?10 to 15 mm, wall thickness 1 mm. B... |
|
 |
1.2510 : Bending spring.
Exterior bending spring. Hardened, burnished steel wire. End bending rings. Wall thickness: 0,8 to 1,2 mm. |
|
 |
2.2510 : Interior bending spring.
These springs slip inside pipes (multi-layers, PER) and afford us to bend these pipes without folding or flattening them.With 1100 mm length, th... |
|
 |
1.2500 : New concept crossbow bender.
ADVANTAGES:Reduced effort and increased efficiency.Annealed copper pipe: - 10 to 22 mm, - 3/8" to 7/8", PEX/AL/PEX pipes: 0 to 32 mm.Patented m... |
|
 |
2.2500 : Cheek and counter former for new crossbow bender. |
|
 |
3.2500: Formers in mm for new crossbow bender. |
|
|
4.2500 : Formers in " for new Crossbow bender. |
|
 |
5.2501 : Crossbow bender.
ADVANTAGES:BENDING FORMERS made of high strength lightweight alloy for bending pipes while still hot.LIGHTWEIGHT ALLOY BODY.RATCHET SYSTEM with excell... |
|
 |
6.2501 : Cheek and counter-former. |
|
 |
1.2518 : Eurostem II portable 14.4 V electric bending machine.
ADVANTAGES:NEW BATTERY: More powerful. Two times more bends. 20 % faster.Bending radius in accordance with French standard EN 1057. Bends up to 1... |
|
 |
2.2518 : Eurostem II Portable 230 V electric bending machine.
Bending radius in accordance with French standard NF 1057. Bends up to 180 Ideal of working with small and medium weight pipes. Very sturdy speed re... |
|
 |
3.2518 : Tripod for Eurostem II. |
|
 |
4. 2518 : Formers and counter-formers for Eurostem II.
* For PEX/AL/PEX pipes** For stainless steel pipes 28 x 1.2 mm |
|
 |
5. 2518 : Concentric radius formers for Eurostem II. |
|
 |
6. 2518 : Battery and charger for Eurostem II. |
|
 |
1. 2402 : Manual hydraulic bender.
For medium and heavy series gas pipes (nfa 49115-en10255).ADVANTAGES:BENDING CAPACITY: Gas pipes: 3/8 to 4 Locksmith's pipes: 12~50 mm. Elect... |
|
 |
1. 2408 : Powered hydraulic bender.
For medium and heavy series gas pipes (nfa 49115 - en 10255).ADVANTAGES:BENDING CAPACITY: Gas pipes: 3/8 to 4 Locksmith's pipes: 12~50 mm. El... |
|